|
|
|
| |
|
|
|
|
|
UNITS G, J, F AND H
|
| |
|
|
|
|
|
UNITS ARE AVAILABLE IN ELECTRIC, MANUAL AIR, AUTOMATIC AIR
|
| |
|
|
|
|
| Our top of the line self-propelled deheaders have been user-proven for many years. |
| |
|
|
|
|
 |
| |
|
|
|
|
Electric models are chosen for quiet
operation and when 110 voltage is
available.
1/3 HP, 110 V, 60 Hz, Single Phase,
Full Load Amps 5.7 and 220 in lbs
Torque.
Optional Electric models available on
request -220 volt single phase - 50
or 60 Hz.
Shipping Weight: 62 lbs., Net weight
53 lbs.
Unit Dimensions: 17"L x 11"W x 19"H |
|
The air model is preferred in industrial
settings where floors and work areas
are wet and electric power is not
available.
60-100 PSI, 25 CFM, airline filter and
lubricator required with all air driven
units.
1/2 HP, Variable Speed, 4 Vane
Reversible Air Motor and 30:1 Gear
Reducer.
Shipping Weight: 58 lbs., Net weight
50 lbs.
Unit Dimension: 17"L x 11"W x 19"H |
|
High Volume - High Performance
This fully automatic air model is ideal
when a large number of drums are
being deheaded.
Automatic powered cutting and
pushbutton controls are features of
this model.
60-100 PSI, 25 CFM, airline filter
and lubricator required with all air
driven units.
1/2 HP, Variable Speed, 4 Vane
Reversible Air Model and 30:1 Gear
Reducer.
Shipping Weight: 70 lbs., Net weight
58 lbs.
Unit Dimensions: 21"L x 11"W x 22"H |
|
| "G" SERIES UNITS * Industrial applications * Inside Chime Cut |
| |
|
|
|
|
|
The most versatile and popular model, the Model G drum deheader cuts on the inside of the rolled edges of the drum
leaving a smooth, burr-free, "hands-safe" edge. |
| |
|
|
|
|
|
| |
|
|
User Proven Features
|
| |
 |
|
| |
|
• Safe - no jagged edges
• Fast - deheads 30-55 gallon drums in less than one
minute
• Simple - easy to operate - no special training required
• Ergonomic - easy to adjust
• Versatile - air and electric power models
• Durable - low maintenance - long lasting
• Portable - can be used wherever drums accumulate
• Universal - cuts all drum sizes, inside and outside cuts
• World wide availability. |
| |
|
|
|
|
| |
|
|
|
 |
| |
|
|
|
|
| |
All "G" Series units can be identified
by the yellow color or yellow stripe. |
|
|
|
| |
|
|
|
|
The Model G is ideal for deheading a high to moderate
volume of full and empty 30-55 gallon steel drums up to
20 gauge construction. Empty drums, once deheaded,
are ideal for use as storage, shipping, or utility containers.
The Model G also easily removes the tops and bottoms
of steel drums to facilitate their disposal.
The Model G self-propelled drum deheaders (available
in air, automatic air and electric power) can be easily
converted to an outside cut. A quick and simple change
of a few components allows you to use this one of a
kind tool for all your drum deheading needs. |
|
| |
|
| |
Inside chime cut models are ideal for general
industrial use; where a USDA approved cutting
method is not required, and drums will not necessarily
be crushed or reconditioned after deheading. Chimes
are left as strong as possible for future drum re-use.
Remove the top or bottom lid of an empty or filled
30-55 gallon steel drum. |
| |
How They Work
Inside chime cut models cut through the first layer of steel
on the inside of the drum chime. Once cut, the drum lid
can be removed by hand. (A rubber mallet and safety
gloves are recommended for this purpose). |
| |
|
|
|
|
| |
|
|
|
|
|
|
Prices for the "G" Series Units
|
|
Model No.
|
Description
|
Price
|
|
Electric Units
|
|
3952
|
GS with 3517 standard cutter wheel
|
$2,708
|
|
3965
|
GS with 3506 cutter wheel/shaft (smaller diameter*)
|
$2,900
|
|
Air Units
|
|
3949
|
Air Model G Unit (GA)
|
$2,970
|
|
3950**
|
Air Model G Unit with 3516 NF/CW
|
$3,092
|
|
Automatic Air Units
|
|
3978
|
RGA with 3517 standard cutter wheel
|
$4,083
|
|
3902
|
RGA with 3516 non-ferrous cutter wheel
|
$4,229
|
|
3969
|
RGA with 3508 non-ferrous cutter wheel/shaft (smaller diameter*)
|
$4,463
|
|
Cutter Wheels
|
|
3530
|
Model G 1.82" diameter tool steel cutter wheel
|
$102
|
|
3506
|
Model G 1.25" diameter tool steel cutter wheel/shaft
|
$175
|
|
3517
|
Model G 1.5" diameter tool steel quick change cutter wheel
|
$102
|
|
3516
|
Model G 1.5" diameter non-ferrous cutter wheel
|
$178
|
|
3508
|
Model G 1.25" diameter non-ferrous cutter wheel/shaft
|
$254
|
|
*Smaller diameter cutter wheels (G units) or drive rollers (J, F, H units) require less bung clearance, and may
therefore require less drum preparation. Larger diameter cutter wheels may have a slightly longer service life.
**Denotes NON-FERROUS CUTTER WHEEL (USED WHEN THERE IS HAZARDOUS OR TOXIC MATERIAL |
|
|
"J" SERIES UNITS * Disposal Applications* Outside Shell Cut
|
| |
|
|
|
|
|
|
| |
|
 |
|
|
Outside Shell Cut
|
|
| |
|
|
|
|
|
| |
|
|
|
 |
|
| |
|
|
|
|
|
| |
|
|
|
Outside shell cut models are ideal
in applications where a drum will
be crushed, flattened, or recondi-
tioned after deheading. Remove
the entire top or bottom to facili-
tate disposition. Use with 30-55
gallon steel drums. |
| |
All "J" Series units can be identified by
the blue color or blue stripe. |
|
|
| |
|
|
|
|
|
|
Unique high powered outside shell cut drum deheader,
designed exclusively for high volume drum disposal (50+
drums per week). Air, electric, and Automatic air models
available. Cuts on outside of drum shell removing chime
and head for easy, and safe disposal. Ideal for clean up
projects and container management. Works on all 30-55
gallon steel drums. Can remove tops and bottoms in less
than 2 minutes. "J" series units can be converted to inside
chime or outside chime cutting style with available
conversion kits.
CE Approved
Air Models Available with Nonferrous Cutter Wheel |
|
|
|
| |
How They Work
Outside shell cut models cut through
the first layer of steel on the outside
of the drum, just below the chime.
Once cut, the entire drum top (or
bottom) can be easily removed by
hand. (Safety gloves are recom-
mended for this purpose). |
| |
|
|
| |
|
|
|
|
|
|
|
Prices for the "J" Series Units
|
|
Model No.
|
Description
|
Price
|
|
Electric Units
|
|
3938
|
JS with 3532 standard cutter wheel, 3552 standard drive roller
|
$2,708
|
|
Air Units
|
|
3931
|
JA with 3532 standard cutter wheel, 3552 standard drive roller
|
$2,970
|
|
3962**
|
JA with 3536 non-ferrous cutter wheel, 3552 standard drive roller
|
$3,092
|
|
Automatic Air Units
|
|
3980
|
Automatic Air J Unit (RJA) W3532 CW
|
$4,083
|
|
3995**
|
Automatic Air J Unit W3536 NF CW
|
$4,228
|
|
Cutter Wheels
|
|
3532
|
Model J 2.266" diameter tool steel cutter wheel (standard)
|
$102
|
|
3536
|
Model J 2.25" diameter non-ferrous cutter wheel
|
$178
|
|
| **Denotes NON-FERROUS CUTTER WHEEL (USED WHEN THERE IS HAZARDOUS OR TOXIC MATERIAL |
|
|
"F" SERIES UNITS * Food Applications* Outside Chime Cut
|
| |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
Outside Chime Cut (USDA)
|
|
|
| |
|
|
|
 |
|
|
|
| |
|
|
Outside chime cut models are ideal in food appli-
cations, or anywhere a USDA- approved cutting
method is required. Protect drum contents from
contamination Lid stays in place until lifted off with
a cover lifter (included) and can be re-used as a
cover. Use with 30-55 gallon steel drums. |
| |
|
|
How They Work
Outside chime cut models cut through the first layer
of steel on the outside of the drum chime. Once cut,
the drum lid can be easily removed with a cover lifter
(included with model). |
All "F" Series Deheader units can be
identified by the white color or white stripe. |
|
|
| |
|
|
|
"F" Series Outside Chime Cut Steel Food Drum Deheaders
USDA APPROVED
High powered long lasting food drum deheaders USDA
Approved. Cuts on outside of steel food drum prevents
contamination. FDA compliant components. Allows
100% access to drum contents, leaves safe no jagged
edge chime. "F" series models can be converted to
inside chime or outside shell cut style with available
conversion hardware. Air, electric and Automatic air
models available. Cover Lifter included with Unit.
CE Approved. |
|
| |
|
|
|
|
|
|
| |
|
|
 |
|
| |
Cover lifter included with all "F" Series units. Also
sold separately. |
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
Prices for the "F" Series Units
|
|
Model No.
|
Description
|
Price
|
|
Electric Units
|
|
3908
|
FS with 3520 standard (std.) cutter wheel, 3552 std. drive roller
|
$2,708
|
|
Air Units
|
|
3901
|
FA with 3520 std. cutter wheel, 3552 std. drive roller
|
$2,970
|
|
Automatic Air Units
|
|
3976
|
RFA with 3520 standard cutter wheel, 3552 std. drive roller
|
$4,083
|
|
Cutter Wheels
|
|
3520
|
Model F 2.04" diameter tool steel cutter wheel (standard)
|
$102
|
|
|
|
"H" SERIES UNITS * For Food Drums with Widely Varying Chimes* Outside Chime Cut
|
| |
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
Outside Chime Cut (USDA)
|
|
|
| |
|
|
|
|
|
|
|
| |
|
Outside chime cut models are ideal in food appli-
cations, or anywhere a USDA- approved cutting
method is required. Protect drum contents from
contamination Lid stays in place until lifted off with
a cover lifter (included) and can be re-used as a
cover. Use with 30-55 gallon steel drums. |
| |
|
How They Work
Outside chime cut models cut through the first layer
of steel on the outside of the drum chime. Once cut,
the drum lid can be easily removed with a cover lifter
(included with model). |
All "H" Series Deheader units can be
identified by the red color or red stripe. |
|
|
| |
|
|
"H" Series Outside Chime Cut For Food &
Industrial Steel Drums
The most versatile drum deheader in the market.
Designed specifically to work on drum chimes of
various thickness and heights. Opens Industrial
and Food Drums. USDA Approved. High powered,
high volume Work Horse for hard to handle drum
chimes. Air and Electric models available. Cover
Lifter included with unit.
CE Approved. |
|
| |
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
| |
|
Cover lifter included with all "H" Series units. Also
sold separately. |
| |
|
|
|
|
|
|
|
|
|
Prices for the "H" Series Units
|
|
Model No.
|
Description
|
Price
|
|
Electric Units
|
|
3928
|
HS with 3531 std. cutter wheel, 3552 std. drive roller
|
$2,807
|
|
Air Units
|
|
3921
|
HA with 3531 standard cutter wheel, 3552 std. drive roller
|
$3,092
|
|
Cutter Wheels
|
|
3531
|
Model H 1.970" diameter tool steel cutter wheel (standard)
|
$102
|
|
| |
| |
|
|
|
|
|
|
|
|
|
|
|
|
DEHEADER ACCESSORIES
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
|
Chime De-Kinker
|
| |
|
|
|
|
|
 |
| |
|
|
|
|
|
This useful tool restores dented chimes to their
original contours to simplify deheading. It
provides great clamping power with little
effort. 14 lbs. shipping weight.
|
| |
|
|
|
|
|
|
|
|
Tower-The foundation of a complete drum
deheading station
|
|
|
|
| |
|
|
|
|
|
|
|
This unit keeps self-propelled drum deheaders
at working height and minimizes lifting. Suitable
for portable or permanent installation, it saves
time when opening large numbers of drums. A
complete deheading station should include the
tower as well as a deheader, chime de-kinker,
universal wrench and spare deheading tool.
|
|
|
Universal Wrench |
|
| |
|
 |
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
This all-plug wrench, made in the USA, easily
and safely opens all know styles of US and
foreign-made bungs and fittings on drums. It's
available in ductile iron or nonferrous bronze.
Open all know styles of bungs and fittigs.
Heavy-duty construction. Long handle provides
excellent heverage. 4 lbs. shipping weight. |
|
Manual Top-Off
|
|
|
|
 |
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
Cover Lifter
|
|
|
| |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
This Top-Off or manual drum deheader is a convenient
way to remove drum tops or bottoms for companies
with an occasional drum deheading need. The Top-Off
is designed for use on 30 to 55 gallon steel drums. |
|
|
|
|
|
|
| |
Remove steel drum heads after deheading with
food deheaders. 5 lbs. shipping weight. |
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
Prices for the Accessories
|
|
Model No.
|
Description
|
Price
|
|
Support Towers
|
|
3150/3152
|
Support Tower for Air Unit
|
$1,270
|
|
3150/3153
|
Support Tower for Air Unit
|
$1,270
|
|
De-Kinker
|
|
3870
|
Restores dented chimes to their original contours to speed and simplify deheading or help restore a compromised seal.
|
$293
|
|
Drum Wrenches
|
|
120
|
Ductile Iron Drum Wrench
|
$47
|
|
121**
|
Non-Ferrous Drum Wrench
|
$87
|
|
Top-Off Deheader
|
|
24646
|
Manual Top-Off Deheader
|
$158
|
|
Drum Head Lifter
|
|
3601
|
Drum Head Lifter
|
$220
|
|
| |
Drum Openers, Automatic Drum Deheader, available in Electric, Manual Air, Automatic Air, Self-Propelled Deheaders, Industrial
Applications, Inside Chime Cut, no jagged edges, cuts on the inside of the rolled edges of the Drum leaving a Smooth, and Burr-Free,
hands-safe edge from your source for material handling equipment. |
|
See specification sheet.